Explore Turning Tools, Milling Machine, and more!

Explore related topics

Vises

Taig milling machine using special clamps to hold machinist vise

Creating an intermediate pulley bearing holder for the Unimat milling head. In this set-up, two of the chuck jaws in the 4-jaw chuck are reversed. In another set-up I used 1/32" thick slotting saw to cut a slot from the left edge to the bored hole. A cap head screw (hole is visible on top edge) is used to clamp the pulley bearing after slotting the edge. Should have used brass shims to protect the part from chuck jaw marks.

Homemade lathe modifications intended for a Unimat including: a storage platform and drawer, tapped holes for future enhancements, dial indicators, adjustable carriage stops, and up-rated motors.

Quick Change Tool Post

Homemade QCTP constructed from steel stock, Allen bolts, and set screws.

Cross slide dial gauge holder

Dial read outs for your lathe or mill/drill - Home Model Engine Machinist

Micro Stop Countersink Drill Attachment kit w/ cutters 5 pieces

Micro Stop Countersink Drill Attachment kit w/ cutters 5 pieces BRAND NEW

Micro Stop Countersink Drill Attachment kit w/ cutters 5 pieces

Anthony Bird uploaded this image to 'Machine shop/LATHE MINI JAWS'.  See the album on Photobucket.

A solution is to make a set of tool makers mini jaws, they clamp on to the regular jaws of the chuck so they expand and contract as normal.

Taig Mill Screwless Vise by Dean Williams -- Homemade screwless vise constructed from a section of 7/8" thick scrap aluminum and intended to fit a Taig mill. Fixed and movable jaws are fabricated from 1 1/4" square aluminum. Capable of accepting 3" workpieces. http://www.homemadetools.net/homemade-taig-mill-screwless-vise

Homemade screwless vise constructed from a section of

MOWRER WW LATHE TOOLS: Derbyshire cross slide lock down for watchmakers lathe

lathe cross slide lockdown, user made lathe tools, mowrer lathe tools, ww lathe tools, derbyshire cross slide

Nice Mill Vice

Got my new vise from Orange a few days ago, was just looking at it a minute ago and thought 'I have to get some photos of this thing be

Minimize tap breakage when tapping in the lathe with this QCTP support

The Home Shop Machinist

Screwless Vise Clamps

I built these screwless vise clamps from sq. x cold rolled steel. On each clamp there are two side pins that hold the vise.

The ultimate South Bend 9" Model A lathe-----SOLD! - US $4,000.00 (Hepler, Kansas) | VintageMachinery.org

The ultimate South Bend 9" Model A lathe-----SOLD! - US $4,000.00 (Hepler, Kansas) | VintageMachinery.org

Pinterest
Search