Villa Pasila Project

Collection by VillaPasila

13 
Pins
 • 
8 
Followers

Photos from the Villa Pasila under construction.

VillaPasila
Interior
Other
Surroundings & Environment
Windows & Doors
Foundation
Construction Details
Cladding
Other Pins

Interior

Corner details.  #timberpanelling  #timberpanels  #timberwoodpanels  #woodenwall  #woodenwalls  #plywoodwalls  #plywood  #plywooddesign…

Villa Pasila on Instagram: “Corner details. #timberpanelling #timberpanels #timberwoodpanels #woodenwall #woodenwalls #plywoodwalls #plywood #plywooddesign…”

46 Likes, 1 Comments - Villa Pasila (@villapasila) on Instagram: “Corner details. #timberpanelling #timberpanels #timberwoodpanels #woodenwall #woodenwalls…”

Other

Greenhouse roof covered with Ruukki Classic Silence.

Greenhouse roof covered with Ruukki Classic Silence.

Surroundings & Environment

The side of the building where concrete stairs will be built.

Villa Pasila (@villapasila) • Instagram photos and videos

The side of the building where concrete stairs will be built.

Windows & Doors

Sliding door being installed. This is a 2,5 x 7,2m door from a Finnish door and window manufacturer Profin. Due to the size the door was delivered in parts and assembled onsite.

Villa Pasila (@villapasila) • Instagram photos and videos

Sliding door being installed. This is a 2,5 x 7,2m door from a Finnish door and window manufacturer Profin. Due to the size the door was delivered in parts and assembled onsite.

A window element for the sliding door. Due to the difficult terrain, all parts needed to be lifted over the building.

Villa Pasila (@villapasila) • Instagram photos and videos

A window element for the sliding door. Due to the difficult terrain, all parts needed to be lifted over the building.

Foundation

The foundation is attached directly into the Finnish bedrock. This helps to keep the surrounding nature untouched and makes the building 'rise from the rock'. The foundation is between 0,8 and 3,5 meters high. Vertical boards in the mold give a non polished and natural look for the concrete.

Villa Pasila (@villapasila) • Instagram photos and videos

The foundation is attached directly into the Finnish bedrock. This helps to keep the surrounding nature untouched and makes the building 'rise from the rock'. The foundation is between 0,8 and 3,5 meters high. Vertical boards in the mold give a non polished and natural look for the concrete.

Construction Details

Some of the sealing products used. The entire wall structure is breathable but still it's important to have controlled flow of air and moisture. Contega Solido Exo is used to seal doors and windows externally. Tescon Vana is used to seal any gaps with the walls before cladding is added. Internally Tescon Nr1 is used with Intello vapour check and airtightness membrane.

Villa Pasila (@villapasila) • Instagram photos and videos

Some of the sealing products used. The entire wall structure is breathable but still it's important to have controlled flow of air and moisture. Contega Solido Exo is used to seal doors and windows externally. Tescon Vana is used to seal any gaps with the walls before cladding is added. Internally Tescon Nr1 is used with Intello vapour check and airtightness membrane.

Cladding

Timber cladding in progress.

Villa Pasila (@villapasila) • Instagram photos and videos

Timber cladding in progress.

Cladding getting completed for the east end of the building.

Villa Pasila (@villapasila) • Instagram photos and videos

Cladding getting completed for the east end of the building.

The timber cladding is made from Finnish spruce. It has larger capacity to absorb moisture, compared to e.g. pine, while still holding it's dimensions. Each board should to be cut from the tree's core for longer lifespan. The boards are 28mm thick and have a 'UTS'  cut profile which is suitable for vertical layout and gives a nordic classic villa look. The boards were pre-painted at the factory and then painted twice before assembly.

Villa Pasila (@villapasila) • Instagram photos and videos

The timber cladding is made from Finnish spruce. It has larger capacity to absorb moisture, compared to e.g. pine, while still holding it's dimensions. Each board should to be cut from the tree's core for longer lifespan. The boards are 28mm thick and have a 'UTS' cut profile which is suitable for vertical layout and gives a nordic classic villa look. The boards were pre-painted at the factory and then painted twice before assembly.

First boards being attached. The paint (Teknos Visa Premium) has high level of gloss (2) which makes the colour look quite different in different lighting conditions. I'd call this Raven Black. The colour is RAL 9017 (Traffic Black).

Villa Pasila (@villapasila) • Instagram photos and videos

First boards being attached. The paint (Teknos Visa Premium) has high level of gloss (2) which makes the colour look quite different in different lighting conditions. I'd call this Raven Black. The colour is RAL 9017 (Traffic Black).

Some of the exterior boards requiring one or two clamps to hold them straight. We wanted to make sure each board is precisely mounted to ensure clean finish with exactly straight lines. The boards are 28mm thick and width varying between 95mm, 120mm and 195mm.

Villa Pasila - Talo kalliolle

Some of the exterior boards requiring one or two clamps to hold them straight. We wanted to make sure each board is precisely mounted to ensure clean finish with exactly straight lines. The boards are 28mm thick and width varying between 95mm, 120mm and 195mm.

Other Pins

Corner details.  #timberpanelling  #timberpanels  #timberwoodpanels  #woodenwall  #woodenwalls  #plywoodwalls  #plywood  #plywooddesign…

Villa Pasila on Instagram: “Corner details. #timberpanelling #timberpanels #timberwoodpanels #woodenwall #woodenwalls #plywoodwalls #plywood #plywooddesign…”

46 Likes, 1 Comments - Villa Pasila (@villapasila) on Instagram: “Corner details. #timberpanelling #timberpanels #timberwoodpanels #woodenwall #woodenwalls…”

Untreated pine panels installed with 2mm spacing

Pine plywood panels

Untreated pine panels installed with 2mm spacing

Greenhouse roof covered with Ruukki Classic Silence.

Greenhouse roof covered with Ruukki Classic Silence.

Timber cladding in progress.

Villa Pasila (@villapasila) • Instagram photos and videos

Timber cladding in progress.

Cladding getting completed for the east end of the building.

Villa Pasila (@villapasila) • Instagram photos and videos

Cladding getting completed for the east end of the building.

The side of the building where concrete stairs will be built.

Villa Pasila (@villapasila) • Instagram photos and videos

The side of the building where concrete stairs will be built.

Sliding door being installed. This is a 2,5 x 7,2m door from a Finnish door and window manufacturer Profin. Due to the size the door was delivered in parts and assembled onsite.

Villa Pasila (@villapasila) • Instagram photos and videos

Sliding door being installed. This is a 2,5 x 7,2m door from a Finnish door and window manufacturer Profin. Due to the size the door was delivered in parts and assembled onsite.

A window element for the sliding door. Due to the difficult terrain, all parts needed to be lifted over the building.

Villa Pasila (@villapasila) • Instagram photos and videos

A window element for the sliding door. Due to the difficult terrain, all parts needed to be lifted over the building.

The foundation is attached directly into the Finnish bedrock. This helps to keep the surrounding nature untouched and makes the building 'rise from the rock'. The foundation is between 0,8 and 3,5 meters high. Vertical boards in the mold give a non polished and natural look for the concrete.

Villa Pasila (@villapasila) • Instagram photos and videos

The foundation is attached directly into the Finnish bedrock. This helps to keep the surrounding nature untouched and makes the building 'rise from the rock'. The foundation is between 0,8 and 3,5 meters high. Vertical boards in the mold give a non polished and natural look for the concrete.

The timber cladding is made from Finnish spruce. It has larger capacity to absorb moisture, compared to e.g. pine, while still holding it's dimensions. Each board should to be cut from the tree's core for longer lifespan. The boards are 28mm thick and have a 'UTS'  cut profile which is suitable for vertical layout and gives a nordic classic villa look. The boards were pre-painted at the factory and then painted twice before assembly.

Villa Pasila (@villapasila) • Instagram photos and videos

The timber cladding is made from Finnish spruce. It has larger capacity to absorb moisture, compared to e.g. pine, while still holding it's dimensions. Each board should to be cut from the tree's core for longer lifespan. The boards are 28mm thick and have a 'UTS' cut profile which is suitable for vertical layout and gives a nordic classic villa look. The boards were pre-painted at the factory and then painted twice before assembly.

Some of the sealing products used. The entire wall structure is breathable but still it's important to have controlled flow of air and moisture. Contega Solido Exo is used to seal doors and windows externally. Tescon Vana is used to seal any gaps with the walls before cladding is added. Internally Tescon Nr1 is used with Intello vapour check and airtightness membrane.

Villa Pasila (@villapasila) • Instagram photos and videos

Some of the sealing products used. The entire wall structure is breathable but still it's important to have controlled flow of air and moisture. Contega Solido Exo is used to seal doors and windows externally. Tescon Vana is used to seal any gaps with the walls before cladding is added. Internally Tescon Nr1 is used with Intello vapour check and airtightness membrane.

First boards being attached. The paint (Teknos Visa Premium) has high level of gloss (2) which makes the colour look quite different in different lighting conditions. I'd call this Raven Black. The colour is RAL 9017 (Traffic Black).

Villa Pasila (@villapasila) • Instagram photos and videos

First boards being attached. The paint (Teknos Visa Premium) has high level of gloss (2) which makes the colour look quite different in different lighting conditions. I'd call this Raven Black. The colour is RAL 9017 (Traffic Black).

Some of the exterior boards requiring one or two clamps to hold them straight. We wanted to make sure each board is precisely mounted to ensure clean finish with exactly straight lines. The boards are 28mm thick and width varying between 95mm, 120mm and 195mm.

Villa Pasila - Talo kalliolle

Some of the exterior boards requiring one or two clamps to hold them straight. We wanted to make sure each board is precisely mounted to ensure clean finish with exactly straight lines. The boards are 28mm thick and width varying between 95mm, 120mm and 195mm.